Converting to polylines
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Newbie Member
- Posts: 8
- Joined: Sat Jan 30, 2010 1:20 pm
Converting to polylines
Maybe I'm not grasping the polyline concept...
I have a simple drawing (a closed shape), constituted by connected arcs and lines. I want to convert it to a polyline.
However, after the polyline command, I can't seem to select a "segment"... Whichever arc or line I touch, I can't select it. Aren't they "segments" ?
I have a simple drawing (a closed shape), constituted by connected arcs and lines. I want to convert it to a polyline.
However, after the polyline command, I can't seem to select a "segment"... Whichever arc or line I touch, I can't select it. Aren't they "segments" ?
Re: Converting to polylines
Hi - could you attach this particular drawing?
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Newbie Member
- Posts: 8
- Joined: Sat Jan 30, 2010 1:20 pm
Re: Converting to polylines
Here it is
Re: Converting to polylines
Thank you!pjrebordao wrote:Here it is
Is this what you are trying to get out of it?
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Newbie Member
- Posts: 8
- Joined: Sat Jan 30, 2010 1:20 pm
Re: Converting to polylines
Sorry... I uploaded the wrong file. Is this one:
Re: Converting to polylines
I assume your problem to create a polygon is based on incorrect transitions:
Please doublecheck your drawing and try again. What is the tolerance which you will use?
Please doublecheck your drawing and try again. What is the tolerance which you will use?
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Converting to polylines
Try this one:
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Newbie Member
- Posts: 8
- Joined: Sat Jan 30, 2010 1:20 pm
Re: Converting to polylines
Thanks. This change you made really made it possible to be converted to polylines. I could easily select the segment(s).
How did you do it ? Finding and fixing the kind of error you shown me ?
Anyway, the reason for all this, is that I want to extrude a set of shapes from 2d to 3d.
I'm trying to use OpenScad for that, but I always get the error "No top level geometry to render"
At first, I thought the problem was the lack of polylines, as OpenScad doesn't support arcs and splines, but trying again after the conversion I got the same result.
BTW, do you happen to know of any other way to do this (extruding a shape) ?
How did you do it ? Finding and fixing the kind of error you shown me ?
Anyway, the reason for all this, is that I want to extrude a set of shapes from 2d to 3d.
I'm trying to use OpenScad for that, but I always get the error "No top level geometry to render"
At first, I thought the problem was the lack of polylines, as OpenScad doesn't support arcs and splines, but trying again after the conversion I got the same result.
BTW, do you happen to know of any other way to do this (extruding a shape) ?
Re: Converting to polylines
Using only 'free' programs or other?pjrebordao wrote:BTW, do you happen to know of any other way to do this (extruding a shape) ?
For the best support please state your operating system, QCAD version and add any supporting DXF/DWG files, screenshots etc...
-
- Newbie Member
- Posts: 8
- Joined: Sat Jan 30, 2010 1:20 pm
Re: Converting to polylines
Free programs if possible.
Re: Converting to polylines
I used the Hatch tool - if you have some difficulties to make a hatch it will show you where to find the problem.pjrebordao wrote:How did you do it ? Finding and fixing the kind of error you shown me ?
Most of the time a automatic (create from segments) Polygon has the same problem ...
Instead of fixing all problems I simply redraw this little shape.
I created a new layer and used it as a temp layer.
Then I took the 3 Points Circle tool to determine the radius and center of each arc.
Next step - Tangent Tool, 2 circles, to connect all circles.
After that I used the Auto Trim Tool to cut the circles in arcs what brings also a perfect transition between the entities,
Switched to the "flange-p" Layer, selected all entities on that layer - deleted all entities,
Switched to the temp layer - selected all on that layer - changed in the Property editor from temp to flange-p layer, this will bring the original used Attributes back,
deleted the temp layer,
Done!
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Converting to polylines
So presumably you are using the QCAD community edition (free version)?pjrebordao wrote:Free programs if possible.
Well the ideal situation would be for Andrew to add the option to save to the Collarda .dae format, then you could use the free Sketchup program to extrude your 2D planes!
Add a feature request for this:
http://www.ribbonsoft.com/bugtracker/
In addition why not ask more questions on the Openscad mailing list, they must know how to do this.
* Please post future community edition related questions in the relevant forum to avoid confusion Good luck.
For the best support please state your operating system, QCAD version and add any supporting DXF/DWG files, screenshots etc...
Re: Converting to polylines
Note that a feature request for Collada export already exists at:Clive wrote:Well the ideal situation would be for Andrew to add the option to save to the Collarda .dae format, then you could use the free Sketchup program to extrude your 2D planes!
Add a feature request for this:
http://www.ribbonsoft.com/bugtracker/
http://www.qcad.org/bugtracker/index.ph ... ask_id=680
-
- Newbie Member
- Posts: 8
- Joined: Sat Jan 30, 2010 1:20 pm
Re: Converting to polylines
So this forum is for the Pro version only ? I wasn't aware...Clive wrote: * Please post future community edition related questions in the relevant forum to avoid confusion Good luck.