Nesting Issues
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Nesting Issues
Im having the following issues when nesting
1) Holes are not nested together with the part
2) Lines are being nested separately even when it comes from the same part
3) Is it possible for the nesting to fill up the first sheet of the material before using the second sheet?
4) Sometimes, overlapping occurs when I use 8 rotation.
Im wondering if there are any solutions to the issues above?
1) Holes are not nested together with the part
2) Lines are being nested separately even when it comes from the same part
3) Is it possible for the nesting to fill up the first sheet of the material before using the second sheet?
4) Sometimes, overlapping occurs when I use 8 rotation.
Im wondering if there are any solutions to the issues above?
- Attachments
-
- Lines split up.PNG (9.93 KiB) Viewed 8394 times
-
- Holes not nested.PNG (11.08 KiB) Viewed 8394 times
Re: Nesting Issues
Most likely that part hasn't a closed contour. If so, please close the contour and try again.
If the nesting still fails please attache the dxf/dwg drawing and indicate Operating system and QCAD version.
Just like our Forum rules are asking for ...
Forum rules
Always indicate Operating system, QCAD version
Attach Drawing files, Screenshots
Post one question per topic.
If the nesting still fails please attache the dxf/dwg drawing and indicate Operating system and QCAD version.
Just like our Forum rules are asking for ...
Forum rules
Always indicate Operating system, QCAD version
Attach Drawing files, Screenshots
Post one question per topic.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Newbie Member
- Posts: 8
- Joined: Sun May 03, 2020 10:01 am
- Location: France
Re: Nesting Issues
Hi,
I'm looking to do nesting, but without rotating parts.
There is the rotation option but I can't set 0 for no rotation.
Qcad Cam 3.24.3 on Ubuntu
I'm looking to do nesting, but without rotating parts.
There is the rotation option but I can't set 0 for no rotation.
Qcad Cam 3.24.3 on Ubuntu
Re: Nesting Issues
If you set the rotation to 4 then it means that each part can be rotated 0 degrees, 90 degrees, 180 degrees or 270 degrees,freeman974 wrote: ↑Fri Jul 03, 2020 10:13 pm...
There is the rotation option but I can't set 0 for no rotation.
Set it to 1 and there will not be a rotation ...
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Newbie Member
- Posts: 8
- Joined: Sun May 03, 2020 10:01 am
- Location: France
Re: Nesting Issues
I've already tried it with one, but it's still giving me rotations.
Re: Nesting Issues
It works flawless with my QCAD/CAM version ....
If possible please attache the drawing for further investigation. Thanks.
If possible please attache the drawing for further investigation. Thanks.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Newbie Member
- Posts: 8
- Joined: Sun May 03, 2020 10:01 am
- Location: France
Re: Nesting Issues
The attached dxf file, thank you
- Attachments
-
- test.dxf
- test file
- (158.36 KiB) Downloaded 408 times
Re: Nesting Issues
Thanks.
Yep - you are right. i wasn't able either to find a setting without a rotation.
Maybe Andrew has more info on that behavior ...
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Nesting Issues
Please make sure that aligning to the longest side is disabled:
Edit > Application Preferences > CAM > Nesting > Align part angles to axis
If the problem persists, please indicate your QCAD/CAM version and platform.
Edit > Application Preferences > CAM > Nesting > Align part angles to axis
If the problem persists, please indicate your QCAD/CAM version and platform.
Re: Nesting Issues
That did the trick with my version 3.24.3.0. Thanks!
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Newbie Member
- Posts: 8
- Joined: Sun May 03, 2020 10:01 am
- Location: France
Re: Nesting Issues
It's working fine, thank you very much.
What is the difference between a value a 1 or a 20 of the "Hul resolution for blocks" option?
What is the difference between a value a 1 or a 20 of the "Hul resolution for blocks" option?