Postprocessor development form for G-code G41/G42
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Indicate the post processor used.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Indicate the post processor used.
Attach drawing files and screenshots.
Post one question per topic.
Postprocessor development form for G-code G41/G42
I have recived an answer from Oleg at "Pumotix" and it seems I will be ok with G41/G42 but just to be on the safe side he asked me for some additional information about the postprocessor. I belive you have to be a developer of this software to be able to answer some of the parameters so if someone who is please could take a look at it I have filled in what I thought was right
- Attachments
-
- Postprocessor development form.odt
- (109.04 KiB) Downloaded 248 times
Windows10
QCAD/CAM 3.26.4
G-code G41/G42 mm
QCAD/CAM 3.26.4
G-code G41/G42 mm
Re: Postprocessor development form for G-code G41/G42
So at the end of the week , never mind the form. Though it led me on a "wild goose chase" that actually tought me something . (I guess, thanks Oleg). Read the manual, at least twice or why not four times before asking questions. I have no need for the fourth or fifth axis, and neither these or coolant or toolchanges are a part of this software (yet). And actually, I belive I can manage that anyway. The chosen postprocessor didn't work out that well when trying it out in the Pumotix simulator but that wasn't a big deal either. As soon as I just set all cuts "on the lines" in the drawing everything seems to be working perfectly. Maybe another postprocessor will work better regarding toolradius compensation, I guess I will figure it out some day. In the Pumotix manual regading G41/G42-codes there where a few "why errors descriptions" that I guess I had overstepped so...
Windows10
QCAD/CAM 3.26.4
G-code G41/G42 mm
QCAD/CAM 3.26.4
G-code G41/G42 mm