Hi From the Uk

Post to this forum to introduce yourself to this forum if you are new here. You might want to include some information about the work you are doing or planning to do with QCAD.

Moderator: andrew

Post Reply
sundancermartin
Newbie Member
Posts: 4
Joined: Thu Feb 11, 2021 10:36 pm

Hi From the Uk

Post by sundancermartin » Thu Feb 11, 2021 10:55 pm

Hi everyone, Im looking to use Qcad for drawing 2.5d components for conversion to gcode on the mac for use on a couple of small cnc machines. cad for he mac platform is quite limited for 2d.

Im having some challenges trying to get the hatching command to work a shape created using polylines or separate shapes and trimming, hoping to get some help with that on here

User avatar
Husky
Moderator/Drawing Help/Testing
Posts: 4935
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: Hi From the Uk

Post by Husky » Thu Feb 11, 2021 11:55 pm

Hi sundancermartin,

thanks for introducing yourself and welcome to the QCAD forum.
sundancermartin wrote:
Thu Feb 11, 2021 10:55 pm
Im having some challenges trying to get the hatching command to work a shape created using polylines or separate shapes and trimming, hoping to get some help with that on here
You are welcome to ask any QCAD related question. Just post your question below the appropriate sub forum like viewforum.php?f=32 and we are happy to try to help you. Most of the time it helps if you can post the dxf or an example dxf which shows the same issue.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."

Post Reply

Return to “Introduce Yourself”