Good afternoon,
I have been struggling to know why my block attributes do not get invisible when changing the visibility of the block they belong to.
Below some pictures to describe my issue.
Thanks for your help.
Bourguigrognon
[SOLVED]Block attributes working
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Newbie Member
- Posts: 7
- Joined: Thu Sep 02, 2021 1:14 pm
[SOLVED]Block attributes working
Last edited by Bourguigrognon on Fri Sep 03, 2021 8:57 am, edited 1 time in total.
Re: Block attributes working
Please attach your drawing file (DXF, DWG), so we can help efficiently, thanks.
-
- Newbie Member
- Posts: 7
- Joined: Thu Sep 02, 2021 1:14 pm
Re: Block attributes working
Here it is
- Attachments
-
- Diagramme d'activité2.dwg
- (38.93 KiB) Downloaded 323 times
Re: Block attributes working
Thanks. The drawing looks fine, the attributes are connected to the block references.
However, attributes are generally entities that live on the same level as the block reference, not inside the block. As such, attributes can be visible even if the block reference is not.
You can configure this behavior under:
Edit > Application Preferences > Graphics View > Behavior > Hide attributes when block references are hidden
However, attributes are generally entities that live on the same level as the block reference, not inside the block. As such, attributes can be visible even if the block reference is not.
You can configure this behavior under:
Edit > Application Preferences > Graphics View > Behavior > Hide attributes when block references are hidden
-
- Newbie Member
- Posts: 7
- Joined: Thu Sep 02, 2021 1:14 pm
Re: Block attributes working
Andrew,
Thanks a lot for your help.
Is there such a setting to avoid the block attributes not to move when changing the block position with its "handle"?
Bourguigrognon
Thanks a lot for your help.
Is there such a setting to avoid the block attributes not to move when changing the block position with its "handle"?
Bourguigrognon
Re: Block attributes working
Andrew advice is usually one question/issue per topic but here it is not stated in the forum rules. See top.Bourguigrognon wrote: ↑Thu Sep 02, 2021 4:09 pmIs there such a setting to avoid the block attributes not to move when changing the block position with its "handle"?
"To keep the forum searchable"
Confirmed: Dragging the block origin reference marker doesn't change Attribute positions.
One can circumvent that with clicking near the block to select it and then point near a block entity to start dragging.
Avoiding the block origin reference or any attribute reference marker.
Dragging is then also by the block origin reference.
Move/Copy (MV) from-to works perfect too.
Regards,
CVH
-
- Newbie Member
- Posts: 7
- Joined: Thu Sep 02, 2021 1:14 pm
Re: [SOLVED]Block attributes working
Good Morning CVH,
Ok, I will pay attention to that next time.
Thank you both for your help and celerity.
Bourguigrognon.
Ok, I will pay attention to that next time.
Thank you both for your help and celerity.
Bourguigrognon.