Spline line type

If you are having problems with QCAD, post here. Please report bugs through our Bug Tracker instead.

Always attach your original DXF or DWG file and mentions your QCAD version and the platform you are on.

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Attach drawing files and screenshots.

Post one question per topic.

Post Reply
lightuser
Newbie Member
Posts: 8
Joined: Fri Nov 25, 2011 2:05 am

Spline line type

Post by lightuser » Mon May 24, 2021 4:53 pm

Hi, I recently upgraded an offline machine. QCAD Pro from 3.24.3.0 to 3.26.1.0 and Windows from W10 1909 18363.3.900 to 20H2 19042.985

I have drawings which include control point splines with an ISO dash line type. In the old version the line is continuously dashed. In the new installation the dashes seem to reset at each control point. I''m finding on a spline with control points close together, the dashes never appear and consequently the line appears to be continuous.

I can't find recent posts with this problem so I'm guessing it's new. I'd welcome any help, or confirmation that my issue can be reproduced?

Many thanks, Tim
Attachments
QCAD Two Splines B.pdf
(9.2 KiB) Downloaded 440 times
QCAD Two Splines A.pdf
(9.17 KiB) Downloaded 388 times
QCAD Two Splines B.dxf
(104.29 KiB) Downloaded 369 times

User avatar
Husky
Moderator/Drawing Help/Testing
Posts: 4935
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: Spline line type

Post by Husky » Mon May 24, 2021 8:14 pm

Hi,
lightuser wrote:
Mon May 24, 2021 4:53 pm
I'd welcome any help, or confirmation that my issue can be reproduced?
Yes - I can reproduce that behavior. Unfortunately I can't figure out why either ... :oops:
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."

User avatar
andrew
Site Admin
Posts: 9037
Joined: Fri Mar 30, 2007 6:07 am

Re: Spline line type

Post by andrew » Mon May 24, 2021 8:43 pm


lightuser
Newbie Member
Posts: 8
Joined: Fri Nov 25, 2011 2:05 am

Re: Spline line type

Post by lightuser » Wed May 26, 2021 9:29 pm

Thanks Andrew. Is there a way to download the Windows installer for vn 3.24.3 (or the latest version without the bug if you can pin it down)? It would make it easier to continue with my project 'til the bug is fixed. I have access to the shop 'til 5/6/21 but can't spot a list of previous versions. Many thanks, Tim

User avatar
andrew
Site Admin
Posts: 9037
Joined: Fri Mar 30, 2007 6:07 am

Re: Spline line type

Post by andrew » Thu May 27, 2021 8:54 am

I'll send you a temporary download link by e-mail tomorrow evening.

Post Reply

Return to “QCAD Troubleshooting and Problems”