MacOS 10.15.7
QCAD PRO 3.26.1.0
The problems occur with a new blank file as well.
The drawing has the following messures: See attached file
1. If a draw a line and change to dotted line, nothing happens
2. Hatches are not working at all
See attached screenshot of file.
The testfile is attached as well.
I always updated on MacOS by overwriting the old app.
Any hints
[solved] Hatching and doted lines
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
[solved] Hatching and doted lines
- Attachments
-
- test.dwg
- (17.47 KiB) Downloaded 314 times
-
- Bildschirmphoto-Unbenannt 3 - QCAD 2021-04-11 11-55-16.png (136.16 KiB) Viewed 3117 times
-
- Bildschirmphoto-Zeichnungseinstellungen 2021-04-11 11-53-07.png (73.77 KiB) Viewed 3117 times
Re: Hatching and doted lines
1. Activate "Screen Based Linetypes" below Menu / View.
2. Try the hatch "Ansi 31", Scale 1, Angle 0. Will that work?
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Hatching and doted lines
Thanks for the tip,
This works now.
This works now.