Hi
I'm a recent upgrade to 3.24 having previously used 3.19 for yrs without problem.
I've had continued issues getting 3.24 to open.
I followed another thread posted previously about removing an opendll file in the plugins folder. This appeared to have worked for a while. Then the other day I noted it had stopped again.
I've tried another removal & install, same issue. It loads to about 50% then nothing.
Tried with AV off too.
Any other suggestions?
TIA
QCAD Pro 3.24 Won't Launch Win 10 64b
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: QCAD Pro 3.24 Won't Launch Win 10 64b
Hello,
Make also sure that both versions are not mixed in the same subdirectory. Every QCAD installation has to be installed in a new/empty subdirectory.
You are using the Community Version or the QCAD Professional version? The Pro doesn't requires any file re-movement.
Make also sure that both versions are not mixed in the same subdirectory. Every QCAD installation has to be installed in a new/empty subdirectory.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: QCAD Pro 3.24 Won't Launch Win 10 64b
I'd do a clean installation from scratch (no need to remove anything).
If it doesn't work, please reset your QCAD installation as described here:
https://qcad.org/en/tutorial-resetting- ... figuration
If it doesn't work, please reset your QCAD installation as described here:
https://qcad.org/en/tutorial-resetting- ... figuration
-
- Senior Member
- Posts: 107
- Joined: Wed Dec 06, 2017 4:06 pm
- Location: Germany - Heidelberg
Re: QCAD Pro 3.24 Won't Launch Win 10 64b
I had a problem with the installation too - it was an earlier version of QCAD but however.
The fix was to run vcredist_x64.exe - why this was needed / missing on my Windows installation I don't know.
The fix was to run vcredist_x64.exe - why this was needed / missing on my Windows installation I don't know.
Best Regards
Sven
QCAD 3.27.6.0 / Windows 11 Professional 64-bit / 16 GB RAM, i5 [email protected], SSD
(former Autosketch 10 user)
Sven
QCAD 3.27.6.0 / Windows 11 Professional 64-bit / 16 GB RAM, i5 [email protected], SSD
(former Autosketch 10 user)