Hello,
I am new with QCAD (3.24.0 Professional for Linux) for 1 week (Before I used DraftSight).
In some old plans, I defined as line types:
"TRACKS": +++++++ (or "Rails" in French)
"BATTING": SSSSSSSSS (or "'isolation" in French)
I see that these linetypes are well defined in the qcadiso.lin file.
With the pattern TRACKS ("+++++") : no problem : it works.
With the pattern BATTTING ("SSSSS") :
in some drawings, it works : the linetype "insulation" is well defined with the pattern "SSSSSSS".
But in other drawings, the linetype "insulation" is empty (no pattern).
Why this difference ?
It seems to me that those drawings refer to the same .lin file
Thank you for your reply
Linetypes definition [SOLVED]
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Junior Member
- Posts: 13
- Joined: Fri Jan 10, 2020 11:06 pm
Linetypes definition [SOLVED]
Last edited by Philsourish on Mon Jan 13, 2020 11:17 pm, edited 1 time in total.
Re: Linetypes definition
Drawing files may contain their own definition of linetypes and override the linetypes defined in the .lin files.
You can reset these drawing internal linetypes using:
Misc > Modify > Reload Linetype Definitions
If you cannot solve the problem, please attach or send the drawing file.
You can reset these drawing internal linetypes using:
Misc > Modify > Reload Linetype Definitions
If you cannot solve the problem, please attach or send the drawing file.
-
- Junior Member
- Posts: 13
- Joined: Fri Jan 10, 2020 11:06 pm
Re: Linetypes definition [Solved]
Thank you very much for your quick response !
It works !
Is it possible to define new types of lines or must we limit to the predefined types ? (there are already quite a few !)
It works !
Is it possible to define new types of lines or must we limit to the predefined types ? (there are already quite a few !)
Last edited by Philsourish on Mon Jan 13, 2020 5:56 pm, edited 1 time in total.
Re: Linetypes definition
You can add new linetypes by adding new .lin files under linetypes/metric or linetypes/imperial of your QCAD installation.
-
- Junior Member
- Posts: 13
- Joined: Fri Jan 10, 2020 11:06 pm
Re: Linetypes definition
Thanks
awesome, it works perfectly!
how to indicate this topic as "SOLVED" ?
awesome, it works perfectly!
how to indicate this topic as "SOLVED" ?
Re: Linetypes definition
Edit you first post.
thanks,
CVH
thanks,
CVH