[solved] Can't join polylines
Posted: Wed Mar 06, 2019 12:21 am
I'm fairly new to QCAD, and so far quite happy. Alas, I've run across an issue that's left me scratching my head. I can't seem to join two polylines that look like they should connect.
Here's a sample from a larger file where I can't join the two entities. The DXF is attached.
I've tried to research this issue here in the forums, but I wasn't able to find anything that pointed me in the right direction. I did find this issue, where the OP described a similar issue, but I don't think it's the same root cause.
Mostly I'm at a loss for how to troubleshoot this kind of thing. When I try to join the entities (for example, by selecting both and doing [Draw] > [PolyLine] > [Create From Selected Entities] ), I get command line output that says:
...but no indication as to why my selected entities couldn't be joined.
Can anyone offer any guidance?
Here's a sample from a larger file where I can't join the two entities. The DXF is attached.
I've tried to research this issue here in the forums, but I wasn't able to find anything that pointed me in the right direction. I did find this issue, where the OP described a similar issue, but I don't think it's the same root cause.
Mostly I'm at a loss for how to troubleshoot this kind of thing. When I try to join the entities (for example, by selecting both and doing [Draw] > [PolyLine] > [Create From Selected Entities] ), I get command line output that says:
Code: Select all
Command: polylinemenu
Command: polylinefromselection
0 polylines created
Can anyone offer any guidance?
Code: Select all
Versions
QCAD version: 3.21.3.0
Date: Sep 17 2018
Qt version: 5.10.0
Compiler version: Clang 8.0.0
Build Date: Sep 17 2018
Revision: 4b91c8ccc5397a316ecbcf4db0becd097eda536d
Architecture: x86_64
OS: macOS
OS version: macOS 10.13