I fumbled something at some point while making a drawing, and now when I paste with Ctrl+V, all the pasted lines come out as a single point, as if scaled all the lines down to 0.
If I use the "move" command, I do not get this issue.
How can I fix this?
QCAD version: 3.27.6.0 (3.27.6)
OS: Windows 10
(Solved) Reset paste functions of Ctrl+V?
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
(Solved) Reset paste functions of Ctrl+V?
Last edited by XX852 on Fri Mar 03, 2023 3:49 pm, edited 1 time in total.
For those who are curious, my username is the model number of the first blue-beam laser pointer I bought.
-
ryancousins
- Premier Member
- Posts: 367
- Joined: Thu Mar 19, 2020 3:47 am
- Location: Michigan, USA
Re: Reset paste functions of Ctrl+V?
XX852:
After typing Ctrl+V, do you have these options appear in the options toolbar at the top of the application window? If so, is "scale" set to 0 instead of 1?
After typing Ctrl+V, do you have these options appear in the options toolbar at the top of the application window? If so, is "scale" set to 0 instead of 1?
- Screenshot 2023-03-02 at 5.38.26 PM.png (56.6 KiB) Viewed 2070 times
Re: (Solved) Reset paste functions of Ctrl+V?
Thank you, that fixed my problem. My scale was at 0 instead of 1.
For those who are curious, my username is the model number of the first blue-beam laser pointer I bought.
-
Heurtaut12
- Registered Member
- Posts: 2
- Joined: Sun Mar 12, 2023 5:20 pm
Re: (Solved) Reset paste functions of Ctrl+V?
many thanks! solved
Re: (Solved) Reset paste functions of Ctrl+V?
@ Heurtaut12,
Please post your reply in the topic you have started:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=9902
If considered solved then please prefix the title of your first post with [solved] by editing it.
Regards,
CVH
Please post your reply in the topic you have started:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=9902
If considered solved then please prefix the title of your first post with [solved] by editing it.
Regards,
CVH