Hello Draughtsmen, I'm trying to scale this drawing to actual size (0.765) but I can't.
The result is that I see circles after the operation. What am I doing wrong?
Thank you, Emiel
Qcad-3.27.1.0 / Windows 10 Pro
[Solved] Scale drawing
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Junior Member
- Posts: 19
- Joined: Mon Feb 22, 2021 12:12 pm
[Solved] Scale drawing
- Attachments
-
- Toog_omtrek_overgetrokken_van foto.dxf
- (102.36 KiB) Downloaded 142 times
Last edited by Emiel Bosch on Sun Jan 08, 2023 10:23 pm, edited 1 time in total.
Re: Scale drawing
Hi Emiel,
Please elaborate step by step what you are doing to appoche this task.Thanks.
The drawing itself looks good to me - no issues to scale it as required.
without knowing what exactly you are doing - no idea.Emiel Bosch wrote: ↑Sun Jan 08, 2023 9:46 pmThe result is that I see circles after the operation. What am I doing wrong?
Please elaborate step by step what you are doing to appoche this task.Thanks.
The drawing itself looks good to me - no issues to scale it as required.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Junior Member
- Posts: 19
- Joined: Mon Feb 22, 2021 12:12 pm
Re: Scale drawing
My apologies Husky, I hadn't specified the y-factor.
Regards, Emiel
Regards, Emiel
Re: Scale drawing
Emiel,
Your drawing scales fine over here.
There are no circles to scale from so I don't expect circles as outcome.
What version of QCAD are you running?
What I did:
Select > Select All (TA) (Selection = 3 Line segments + 2 Polylines)
Modify > Scale (SZ)
Indicated the Origin as focus point.
Entered 0.765 as proportional scale, opted for deleting the original and accepted the dialog.
The horizontal line is now just over 919mm.
Regards,
CVH
Your drawing scales fine over here.
There are no circles to scale from so I don't expect circles as outcome.
What version of QCAD are you running?
What I did:
Select > Select All (TA) (Selection = 3 Line segments + 2 Polylines)
Modify > Scale (SZ)
Indicated the Origin as focus point.
Entered 0.765 as proportional scale, opted for deleting the original and accepted the dialog.
The horizontal line is now just over 919mm.
Regards,
CVH
Re: Scale drawing
No problem - have a nice day.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: [Solved] Scale drawing
With an empty Y factor the Polylines are reduced to 3 nodes and look like circles.
A very odd outcome that is worth investigating.
The lines are reduced to Null-entities.
IMHO scaling with an empty factor is an error and should not be preformed ...
Or it should default to factor 1.00 similar as with an error for the Paste scale.
https://www.qcad.org/rsforum/viewtopic. ... 539#p39530
Regards,
CVH