Hi
Mac--Monterey-12.4 Qcad pro 3.26.2
Can I get an isometric drawing from an existing 2 d drawing without having to draw the whole item in isometric.
Thanks
Ross
Isometric
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Isometric
Yes, QCAD can help you to project each face of an existing drawing into an isometry. But it isn't a full automatic projection - QCAD needs still your help ...
To get a feeling for the tool select a face like a frontview and launch the isometry tool below Menu / Modify / Projection / Isometry Projection. Keep an eye on the option bar - I assume it is intuitive ...
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Isometric
Hi--Thanks----very clever.
Maybe asking a lot now--can I give it a thickness to make it 3d or does this need to be drawn in as an addition.
Thanks again--Ross
Maybe asking a lot now--can I give it a thickness to make it 3d or does this need to be drawn in as an addition.
Thanks again--Ross
Re: Isometric
No, QCAD is a 2D program. To do some 3D work you need a 3D program ...
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."