[{SOLVED] Standard library item 'Sink' broken
Moderator: andrew
[{SOLVED] Standard library item 'Sink' broken
QCADpro 3.25.2.1 / win7pro 32 bit
The library item 'Sink' looks broken ...
Regards,
CVH
The library item 'Sink' looks broken ...
Regards,
CVH
Last edited by CVH on Thu Dec 10, 2020 7:39 am, edited 1 time in total.
Re: Standard library item 'Sink' broken
No, it doesn't.
- Attachments
-
- sink.dxf
- (15.21 KiB) Downloaded 432 times
Ich will nicht streiten. Ich will nur deutlich machen, dass ich Recht habe und DU NICHT.
Re: Standard library item 'Sink' broken
Thanks to check
What version have you running?
Double-clicked on the link of your dxf file.
First got this:
After a QCAD reboot I get the same warning and both times it looks like this one: Doesn't look OK at my side ...
Yet another wipe and reinstall is lurking already.
Still very nice of you that you tested it.
Regards,
CVH
What version have you running?
Double-clicked on the link of your dxf file.
First got this:
- Opening drawing: C:\Users\Admin\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\5C1XQV8Y\sink.dxf...
Recovering file: C:\Users\Admin\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\5C1XQV8Y\sink.dxf...
Recovery complete
Drawing loaded successfully: C:\Users\Admin\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\5C1XQV8Y\sink.dxf
Format: R24 (2010) DXF Drawing (OpenDesign) (*.dxf)
After a QCAD reboot I get the same warning and both times it looks like this one: Doesn't look OK at my side ...
Yet another wipe and reinstall is lurking already.
Still very nice of you that you tested it.
Regards,
CVH
Re: Standard library item 'Sink' broken
Wondering...
Does anyone get the same errors as me with the file that TSG-Thomas posted?
CVH
Does anyone get the same errors as me with the file that TSG-Thomas posted?
CVH
-
- Senior Member
- Posts: 107
- Joined: Wed Dec 06, 2017 4:06 pm
- Location: Germany - Heidelberg
Re: Standard library item 'Sink' broken
Hi CVH,
it looks broken on my system too.
For whatever reason - not important for me but a bit strange that there are users where it looks ok.
it looks broken on my system too.
For whatever reason - not important for me but a bit strange that there are users where it looks ok.
Best Regards
Sven
QCAD 3.27.6.0 / Windows 11 Professional 64-bit / 16 GB RAM, i5 [email protected], SSD
(former Autosketch 10 user)
Sven
QCAD 3.27.6.0 / Windows 11 Professional 64-bit / 16 GB RAM, i5 [email protected], SSD
(former Autosketch 10 user)
Re: Standard library item 'Sink' broken
I have to say, I'm working with QCAD 3.25.2.2 under macOS.
Maybe it's different. It wouldn't be the first time.
Thomas
Maybe it's different. It wouldn't be the first time.
Thomas
Ich will nicht streiten. Ich will nur deutlich machen, dass ich Recht habe und DU NICHT.
Re: Standard library item 'Sink' broken
It gets even better.
When I call the library "Archtecture" under Windows, a message "Recovering file: C: / Program Files ..." appears and the recovered sink.dwg is displayed incorrectly.
Everything works fine under macOS. No discovery, no misrepresentation.
Thomas
When I call the library "Archtecture" under Windows, a message "Recovering file: C: / Program Files ..." appears and the recovered sink.dwg is displayed incorrectly.
Everything works fine under macOS. No discovery, no misrepresentation.
Thomas
Ich will nicht streiten. Ich will nur deutlich machen, dass ich Recht habe und DU NICHT.
Re: Standard library item 'Sink' broken
It looks correct here on:
- Win32, regular and legacy (XP)
- Win64
- QCAD 3.25.2.2 as well as QCAD 3.25.2.1
I did notice that the file was created using an older version of dxflib. This could be an OpenDesign bug or inconsistency if certain information is missing in the file. I've rewritten the file using OpenDesign and a newer dxflib and attached it. Perhaps you can test these on your systems.
- Win32, regular and legacy (XP)
- Win64
- QCAD 3.25.2.2 as well as QCAD 3.25.2.1
I did notice that the file was created using an older version of dxflib. This could be an OpenDesign bug or inconsistency if certain information is missing in the file. I've rewritten the file using OpenDesign and a newer dxflib and attached it. Perhaps you can test these on your systems.
- Attachments
-
- sink_opendesign.dxf
- (105.5 KiB) Downloaded 426 times
-
- sink_dxflib.dxf
- (29.64 KiB) Downloaded 450 times
Re: Standard library item 'Sink' broken
Both work fine here under macOS AND Windows 10.
Thomas
Thomas
Ich will nicht streiten. Ich will nur deutlich machen, dass ich Recht habe und DU NICHT.
Re: Standard library item 'Sink' broken
Confirmed
No errors while loading, od=R27, lib=R15, both look OK.
Regards,
CVH
No errors while loading, od=R27, lib=R15, both look OK.
Regards,
CVH
-
- Senior Member
- Posts: 107
- Joined: Wed Dec 06, 2017 4:06 pm
- Location: Germany - Heidelberg
Re: Standard library item 'Sink' broken
Same on my system. Both ok now.
Best Regards
Sven
QCAD 3.27.6.0 / Windows 11 Professional 64-bit / 16 GB RAM, i5 [email protected], SSD
(former Autosketch 10 user)
Sven
QCAD 3.27.6.0 / Windows 11 Professional 64-bit / 16 GB RAM, i5 [email protected], SSD
(former Autosketch 10 user)
SOLVED: Standard library item 'Sink' broken
Solved in 3.25.2.4
Thanks
CVH
Thanks
CVH