Free Hatch Patterns
Posted: Wed Nov 20, 2019 10:31 pm
Hi All
PLEASE READ
It is good practice to keep the hatch origin near the hatch.
If you go too far away from the Origin, tiles will eventually loose coherence, this is even true
with installed standard hatches eg; AR-CONC.PAT
CVH is looking at some ideas he has, after that is sorted and I have an update on Tile2Hatch
I will redo the tiles that I've temporarily removed for now.
.
If anyone is interested I have a free standalone Basic Hatch Pattern Tool you can download on link below:
It works on Linux ( WINE ) & Windows 2000 - Windows 10 32 & 64bit ,
It can be used to create hatches for QCAD Community & Pro Versions.
Also try Basic Pattern Maker created by Myself and PeteVick, create your own basic hatch patterns.
Basic Hatch Pattern or Basic Pattern Maker which is Windows and Linux Compatible
.
https://qcad.org/rsforum/viewtopic.php? ... =45#p39904 <--- Basic Hatch Tool https://qcad.org/rsforum/viewtopic.php? ... 995#p42607 <--- Basic Pattern Maker
. .
I have removed some of my patterns created by Tile2Hatch Tool, some of my earlier patterns
seem to be ok apart from the QCAD-LOGO that Fails when hatching 100000 , 100000 from zero point
this is not just an error in Tile2Hatch Tool it also seems to happen with AC tool but not as bad eg. 1 line out of place..
Sorry for the inconvenience I've removed some of my patterns and I will replace hopefully soon..
It's mainly effecting patterns that have arcs or circle shapes in them
The Patterns below have now been reinstated see page 4 of this topic
Bubbles-01 ( not included in qcad build )
Bubbles-02 ( not included in qcad build )
Leaf-01 ( not included in qcad build )
Leaf-02 ( not included in qcad build )
Leaf-03 ( not included in qcad build )
QCAD-LOGO ( Included in qcad build )
Squiggle-01 ( Included in qcad build )
Squiggle-02 ( Included in qcad build )
Weaving ( not included in qcad build )
I've Optimised some of my patterns using a Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
I will be posting these on page 3 of this thread, please replace current patterns with these, the
only difference is in some cases file size and other cases reduces the load on the resources and
now line segments are continuous rather than broken between tile patterns..
This is where I'll be posting New Hatch Patterns....
Requests are welcome...
Metric files now included further on in this thread see page 2
Also updated all PAT file header info so it will look as if they haven't been downloaded yet as I had to delete and repost..Enjoy
Cheers
John Hyslop
PLEASE READ
It is good practice to keep the hatch origin near the hatch.
If you go too far away from the Origin, tiles will eventually loose coherence, this is even true
with installed standard hatches eg; AR-CONC.PAT
CVH is looking at some ideas he has, after that is sorted and I have an update on Tile2Hatch
I will redo the tiles that I've temporarily removed for now.
.
If anyone is interested I have a free standalone Basic Hatch Pattern Tool you can download on link below:
It works on Linux ( WINE ) & Windows 2000 - Windows 10 32 & 64bit ,
It can be used to create hatches for QCAD Community & Pro Versions.
Also try Basic Pattern Maker created by Myself and PeteVick, create your own basic hatch patterns.
Basic Hatch Pattern or Basic Pattern Maker which is Windows and Linux Compatible
.
https://qcad.org/rsforum/viewtopic.php? ... =45#p39904 <--- Basic Hatch Tool https://qcad.org/rsforum/viewtopic.php? ... 995#p42607 <--- Basic Pattern Maker
. .
I have removed some of my patterns created by Tile2Hatch Tool, some of my earlier patterns
seem to be ok apart from the QCAD-LOGO that Fails when hatching 100000 , 100000 from zero point
this is not just an error in Tile2Hatch Tool it also seems to happen with AC tool but not as bad eg. 1 line out of place..
Sorry for the inconvenience I've removed some of my patterns and I will replace hopefully soon..
It's mainly effecting patterns that have arcs or circle shapes in them
The Patterns below have now been reinstated see page 4 of this topic
Bubbles-01 ( not included in qcad build )
Bubbles-02 ( not included in qcad build )
Leaf-01 ( not included in qcad build )
Leaf-02 ( not included in qcad build )
Leaf-03 ( not included in qcad build )
QCAD-LOGO ( Included in qcad build )
Squiggle-01 ( Included in qcad build )
Squiggle-02 ( Included in qcad build )
Weaving ( not included in qcad build )
I've Optimised some of my patterns using a Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
I will be posting these on page 3 of this thread, please replace current patterns with these, the
only difference is in some cases file size and other cases reduces the load on the resources and
now line segments are continuous rather than broken between tile patterns..
This is where I'll be posting New Hatch Patterns....
Requests are welcome...
Metric files now included further on in this thread see page 2
Also updated all PAT file header info so it will look as if they haven't been downloaded yet as I had to delete and repost..Enjoy
Cheers
John Hyslop