Search found 2818 matches

by Husky
Wed Feb 19, 2020 12:21 am
Forum: QCAD 'How Do I' Questions
Topic: Proper CAD usage
Replies: 3
Views: 74

Re: Proper CAD usage

When making a CAD drawing, do you still put all three views on one page? In 2D CAD you have a lot of similarities with the old drawing board. If one view is enough to cover all information of the drawing then one view is ok. If you need two, three or even more views - that is ok too. But it depends...
by Husky
Tue Feb 18, 2020 11:54 pm
Forum: QCAD 'How Do I' Questions
Topic: Hidden lines
Replies: 1
Views: 54

Re: Hidden lines

It is common practice in CAD to use Layer with different Attributes for Linetype, Line weight etc. etc. This tutorial explains the idea behind it: https://qcad.org/en/tutorial-working-with-layers A basic layer list could look like my one but you are free to change it to what ever works best for you....
by Husky
Tue Feb 18, 2020 11:38 pm
Forum: Introduce Yourself
Topic: Introduction
Replies: 1
Views: 47

Re: Introduction

Hi Joseph - welcome to the QCAD forum.

Sounds like you have all ducks in a row - except the CAD part. e_surprised Don't worry about that! With your background I assume it will be a piece of cake :wink:
by Husky
Tue Feb 18, 2020 6:59 am
Forum: QCAD 'How Do I' Questions
Topic: Diagonal lines
Replies: 9
Views: 165

Re: Diagonal lines

May I ask you again: What is your Operation System / QCAD version? This is the worsted setting/display what I can think of on my system. Is that similar to your issue? Husky-2020.02.17-01.png If not please post a screenshot and the dxf/dwg file. Thanks. Where is the ortho button located? I don't see...
by Husky
Mon Feb 17, 2020 4:32 am
Forum: QCAD Community Edition
Topic: Importing items
Replies: 7
Views: 540

Re: Importing items

Hi, Item "P50" was selected, but as you can see, another item further up the list has been dragged. There is only one scenario which I can imagine. If I'm wrong - then I need the drawing. e_surprised Could it be ... You try to insert a block named "P50", in your drawing exist already a block named "...
by Husky
Sun Feb 16, 2020 8:54 pm
Forum: QCAD 'How Do I' Questions
Topic: Diagonal lines
Replies: 9
Views: 165

Re: Diagonal lines

When I draw any diagonal line it comes out segmented. What do you mean with diagonal line? A horizontal or vertical line isn't segmented? Or is there a way to make them come out straight. How is the Linetype controlled? With layers? Is the chosen line type "Continuous" used? What is your Operation ...
by Husky
Sun Feb 16, 2020 6:37 pm
Forum: Chat
Topic: COMMAND
Replies: 1
Views: 53

Re: COMMAND

Have you tried the "Space key" on your keyboard ...?
by Husky
Sat Feb 15, 2020 11:57 pm
Forum: QCAD Troubleshooting and Problems
Topic: Thanks and a couple of questions
Replies: 4
Views: 78

Re: Thanks and a couple of questions

So your saying this stuff is not common at all? Well .............. yes - basically that is what I said. e_surprised Could I be having a faulty down load problem? Very unlikely. But it is possible that you downloaded a version which isn't meant for your Operation System. Please double check it.
by Husky
Sat Feb 15, 2020 8:51 pm
Forum: QCAD Professional
Topic: Liniendarstellung im Model-Space und Paper_Space
Replies: 10
Views: 710

Re: Liniendarstellung im Model-Space und Paper_Space

Hallo Thomas, Im Model_Space arbeite ich mit den Zeichnungseinstellungen "m". Im Paper_Space mit "mm". Wenn ich diese Aussage sehe frage ich mich warum Du diese unterschiedlichen Einheiten verwenden musst? Das kompliziert meiner Meinung nach nur unnötig Deinen Arbeitsablauf und ist zudem anfällig fü...
by Husky
Sat Feb 15, 2020 8:19 pm
Forum: QCAD Troubleshooting and Problems
Topic: Thanks and a couple of questions
Replies: 4
Views: 78

Re: Thanks and a couple of questions

But.... I'm having trouble with switching from the command cross hairs, back to the arrow head selection curser. Often double clicking on the right mouse button fails to get results I might have to do it 6 times before I get the arrow back again. Escape button is useless too. Part of the time it wo...
by Husky
Sat Feb 15, 2020 7:43 pm
Forum: QCAD Professional
Topic: [solved] Fehler beim Skalieren, Rotieren oder Spiegeln
Replies: 3
Views: 110

Re: Fehler beim Skalieren, Rotieren oder Spiegeln

Sam wrote:
Sat Feb 15, 2020 2:38 pm

Kann das jemand bestätigen?
Ja, kann ich bestätigen unter Win10/64!
Bitte fülle einen Fehlerbericht (bugreport) aus unter https://www.qcad.org/bugtracker damit sich dem schnell angenommen wird. Danke.
by Husky
Sat Feb 15, 2020 5:11 am
Forum: QCAD 'How Do I' Questions
Topic: Problems offsetting with distance
Replies: 6
Views: 291

Re: Problems offsetting with distance

After launching the Offset tool an Option bar will pop up automatically ... Husky-2020.02.14-03.png ... with different Polyline modes. Just click the one which suits your situation best - if it does not what you expected click the undo tool and try with a different mode. If the option bar doesn't po...
by Husky
Sat Feb 15, 2020 5:01 am
Forum: Introduce Yourself
Topic: Hi, I'm wayne Evans
Replies: 1
Views: 122

Re: Hi, I'm wayne Evans

Hi elewayne - welcome to the QCAD forum. :wink:
by Husky
Fri Feb 14, 2020 10:23 pm
Forum: QCAD Troubleshooting and Problems
Topic: Hints.
Replies: 2
Views: 102

Re: Hints.

Longines wrote:
Fri Feb 14, 2020 6:30 pm
Hello.
After reinstalling the program I lost hints of the function during drawing,...
Was the reinstalling done in an already existing QCAD installation? If yes please deinstall QCAD and reinstall it in a new or at least empty subdirectory.

Go to advanced search