|
2057 | QCAD (main) | Feature Request | Low | Multiline tool | Assigned | |
2 |
Task Description
Implement a multiline tool.
|
|
2060 | QCAD (main) | Feature Request | Low | Dialog box for Layer Status | Assigned | |
1 |
Task Description
So far, layer status has only been implemented very rudimentarily. I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.
|
|
2063 | QCAD (main) | Performance Issue | Low | Bad performance while zooming inside layout block with ... | Assigned | |
2 |
Task Description
Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected. The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.
edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.
I just noticed the selection box has the same problem!
|
|
2070 | QCAD (main) | Feature Request | Low | cropping image | Assigned | |
4 |
Task Description
It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline
|
|
2072 | QCAD (main) | Suggestion | Low | Inserted and flipped block mirrors text and dim | Assigned | |
|
Task Description
Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.
Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.
Version 3.23.0 doesn’t shows this behavior.
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206
|
|
2087 | QCAD (main) | Feature Request | Low | More options for "Paste along Entity" [PE] | Assigned | |
1 |
Task Description
“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.
Would be a nice time saver to have the same options for “Paste along Entity” too.
|
|
2088 | QCAD (main) | Bug Report | Very Low | column headers of the "General: tool settings " resize... | Assigned | |
|
Task Description
Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc. The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.
|
|
2091 | QCAD (main) | Feature Request | Low | Toggle redrawing of hatches | Assigned | |
2 |
Task Description
Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.
The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.
This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch. Or the draft mode can be extended to include simplified hatches while modifying.
Also see the discussion
|
|
2092 | QCAD (main) | Bug Report | Low | crash when changing shortcut in preferences | Assigned | |
|
Task Description
The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window. In the attachement are the cli warnings. I also tried the 3.24.3.9 snapshot with the same result.
|
|
2097 | QCAD (main) | Bug Report | Very Low | Very hard to snap to baseline reference point of dimens... | Assigned | |
|
Task Description
With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension. I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.
|
|
2098 | QCAD (main) | Bug Report | Very Low | Offset will pick up hidden blocks while using it in a l... | Assigned | |
1 |
Task Description
When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden. It is not happening with all the block.
|
|
2099 | QCAD (main) | Bug Report | Low | DIM Label, Square Symbol doesn't adopt layer attributes | Assigned | |
|
Task Description
The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color. If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.
It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...
|
|
2107 | QCAD (main) | Feature Request | Very Low | Add a button to the tool bar to allow for a quick backg... | Assigned | |
1 |
Task Description
I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.
|
|
2125 | QCAD (main) | Bug Report | Low | Text disappears when you zoom | Waiting on User | |
|
Task Description
When I zoom, the text disappears in certain zoom levels after updating to the latest version.
|
|
2127 | QCAD (main) | Feature Request | Low | Snap for predicted intersections while using "Restrict ... | Assigned | |
2 |
Task Description
I would like to request a new kind of snap: a “Restricted Intersection” snap that appears at the point where an entity would intersect with a line drawn from Relative Zero that fulfills the current EL criteria. “Restricted Intersection” snaps would be similar to other Relative Zero-based snaps (like “Perpendicular” and “Tangential”), but would predict the point of the snap from the EL constraints instead of the characteristics of the entity being snapped to. Naturally a value of 0 for angle or length would result in that constraint being ignored.
Additional operational flexibility could be achieved by allowing the snap to exist regardless of whether EL is actually in use. To be useful this would probably require determining snap locations based on angle OR length as opposed to angle AND length.
Implementing this new snap would allow, for example, for easily drawing a line of unknown (but determinable) length at a specified angle between a given point and a given entity (see discussion here), with the “Restricted Intersection” snap ensuring that the endpoint of the new line forms an intersection with the entity in question. Currently the same goal can be achieved a couple of different ways, but they all involve at least two separate steps.
|
|
2130 | QCAD (main) | Task | Low | Text: Text dialog removes tabs | Assigned | |
|
Task Description
Text dialog (QTextEdit) strips tabs in toHtml. If tabs can be retained, text entities could support tabs.
|
|
2138 | QCAD (main) | Suggestion | Very Low | Block zoomstate supersedes Model_Space after Undo of BC | Assigned | |
1 |
Task Description
Summary: Block zoomstate supersedes Model_Space after Undo of BC
QCAD Professional Version: 3.25.2.1 (3.25.2.1) Internet: QCAD.org Build Date: Oct 15 2020 Revision: 2895712 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown «< (Win installer 32 bit)
With the file provided: ZW to see the top green ‘revision cloud’ up close QQ Box select around the cloud »> 2 entities in selection BC, select origin somewhere inside the selection, accept proposed naming »> ‘Block 1’ is created from the selection TN BD, select the newly created Block Reference »> Auto zoom of ‘Block 1’ (Intended behavior) OO »> Returns to Model_Space with the zoomstate of the removed Block »> Halfway down the drawing »> The former zoomstate of the Model_Space is lost
Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378
This proves they do, even if the block doesn’t exists anymore.
Regards, CVH
PS: 3th trial to enter a suggestion ...
|
|
2140 | QCAD (main) | Suggestion | Low | Changing navigation mode for mouse wheel doesn't change... | Assigned | |
1 |
Task Description
Looks like error, but may be that’s feature request.
CAD software uses typical navigation behavior as: Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.
Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior: Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.
Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.
QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel. Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!
Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.
|
|
2145 | QCAD (main) | Bug Report | Low | Modify > Trim Both: closed polyline as either entity br... | Assigned | |
1 |
Task Description
QCAD Professional
Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Use TM by mistake to trim a line to a closed shape. Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7780 File included in the topic. Y1 Original Y2 Faulty use of TM Y3 After ‘Undo’
Husky only ‘could agree on a not proper working undo’ The conditional clause of this sentence is ‘the odd choice’. Blaming this on incompetence. Insight is the best way to get better ... ... but the rest is more an odd choice of tools for this kind of task ...
Again, the MISTAKE was by accident, not intended, in a flick of the wrist ... I didn’t change the trimming method, I simply forgot to ... only once.
The ‘undo’ of my incompetent MISTAKE didn’t returned to how the situation was before I erroneous trimmed with TM. I was simply undoing my erroneous action.
Documented it in 4 quadrants. For this, 4 times on purpose, and not as a consistent ‘odd choice’.
Regards, CVH
|
|
2146 | QCAD (main) | Suggestion | Very Low | Keep 'Invisible' objects invisible while saving | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882 Explanation found in REntity.cpp Listed as a Public Member Functions inherited from RObject
Regards, CVH
|
|
2147 | QCAD (main) | Suggestion | Very Low | Allow breaking up self-intersecting a 2e time (at endpo... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can cut (DI) once. Cutting the second segment results in NO cut.
Regards CVH
|
|
2148 | QCAD (main) | Suggestion | Very Low | Allow undo after breaking up self-intersecting with D2 ... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can break out segment (D2): - removing one of the loops with the ‘remove’ option. - leaving both without the ‘remove’ option. Bug? Without the ‘remove’ option it can’t be undone.
Regards CVH
|
|
2149 | QCAD (main) | Suggestion | Very Low | Allow undo after auto trim self-intersecting with AX in... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can auto trim (AX): - The lower loop. - The top loop. Bug? The action on the top loop can’t be undone.
Regards CVH
|
|
2155 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polyline Arcs with Width = 2R | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Most likely not related to the QCAD version, rather an old sore.
File included Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803 Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’
Polyline arcs with Width = 2R render as circle segments rather than circle sectors. As Non-reversed arcs these don’t explode. As reversed arc these explode to a single arc rather than a circle sector contour.
There is also still the faulty rendering with Z not zero https://qcad.org/bugtracker/index.php?do=details&task_id=1923
Regards, CVH
|
|
2157 | QCAD (main) | Bug Report | Low | Controlpoint Spline exploded to polyline may induce NaN... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Documented in 3.25.2.4, reproducible under 3.25.2.7 In the attached file: → Explode the trial cases and locate NaN Widths. → These faulty widths are cleared while saving and reverting. = work around.
Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902 Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901 Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6
Arctic_Eddie reports failing CAM offset at exactly these points !!! Reported is a faulty arc with radius of over 360,000mm. - I can not reproduce this under QCAD working further on the Polys with NaNs. - However the direct offset of such controlpoint Splines is erroneous. (see file in post 30902)
Arctic_Eddie reports arc radii of over 10,000mm. - These don’t seem to be faulty. - I agree that BiArc fitting should be bound to a lower and certainly to an upper limit. - That should be huge otherwise faint curvature is represented by many wobbles or too quick by straight lines. (All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)
Regards, CVH
|
|
2159 | QCAD (main) | Bug Report | Low | Draw > Polyline > Polyline from Selection: may induce N... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32 Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Discovered in 3.25.2.4, reproducible under 3.25.2.7
Draw any open or closed chain of line entities. Select All. OC to Polyline. Step through vertices.
No example file provided because these NaN values are not saved to a file. More pronounced with lines as with arcs. Less pronounced when recombining after an explosion. Some methods clear these to value = void. Some methods clear these to zero (OR). Can also occur when adding segments to an existing polyline with OC.
Regards, CVH
|
|
2160 | QCAD (main) | Bug Report | Low | Draw > Polyline > Relocate Start Point: fails on polyli... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Origin: I like to start my CAM paths at low curvature instead starting at high curvature. Ellipses may explode with the startpoint at the tip. (file Y2)
Documented in 3.25.2.4, reproducible under 3.25.2.7
File included with 4 LayerStates - Original Ellipses: Y1 - Exploded to polylines (32 segments): Y2 - Direct after XP, OR performs different on the left top one: Y3 - Faulty solutions by OR: Y4 (= saved state)
The results may differ with the saved explosions.
With the file. Y1 TA XP Relocate startpoint with OR to an existing reference (called ‘End’)
Regards, CVH
|
|
2161 | QCAD (main) | Feature Request | Low | Make Polyline from Selection (OC) configurable for simp... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Not related to OS, nor version.
The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar. The method Polyline from Selection (OG) has no UI or none showing.
OG retrieves a tolerance from QCAD.ini, what is initially not set:
var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);
The tolerance will be default = 0.001 similar as the default in AppPrefs. The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.
OG calls PolylineFromSelection.autoJoinSegments with this tolerance:
var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);
PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape with simplification hard coded to true. (last parameter)
// create polyline from line, arc, spline or open polyline entity:
var polyline = PolylineFromSegments.createPolylineShape(
entity, doc, vTolerance, op, undefined,
traversed, callBacks, undefined, true);
I would like to see the simplification optional and default = true.
Regards, CVH
|
|
2162 | QCAD (main) | Suggestion | Low | Update the parameter with simplify of RPolylineData & R... | Assigned | |
1 |
Task Description
Unrelated to OS, nor version
Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372
Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated. The Classes still refer to an ‘angleTolerance’.
Regards, CVH
|
|
2169 | QCAD (main) | Bug Report | Low | Missing G-Code G00 X0 Y0 when placing hole at x0 y0 | Assigned | |
|
Task Description
When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code. So the first cut was made at the current position of the tool, not at x0 y0!
|
|
2174 | QCAD (main) | Bug Report | Low | [SOLVED] Numerous shortcomings when exploding Polylines... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7, Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Issues most likely unrelated to OS and installations before 3.25. Related post: https://qcad.org/rsforum/viewtopic.php?&t=7982
Flaws documented in full in attached dxf. The dxf has meaningful Layer States.
4 Columns: - Prior Art - The test cases - Actual results - Results with proposed fix
Tried as many things as I can come up with. Orange: Flaws Red: Errors Green: Good results (or as good as I can get them)
Solution(s) given in attached script explode.js (I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)
In section: “explode polyline into line and arc segments” group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}” All additions, updates & typos are marked with “CVH”, one can textual search for it. Over-documented for sure. Any Eaction is to debug in Windows and is obsolete.
Included PreferencesPage.ui is updated for the all Splines from Text fix Still in consideration: Forcing cubic splines from text to degree 2 ... ... I am rather convinced ...
CVH
|
|
2176 | QCAD (main) | Bug Report | Very Low | Modify > Break out Manual: relevance of order of click ... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7; Win installer 32 bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988 File included. I have no intention to make 48 separate reports.
CVH
|
|
2178 | QCAD (main) | Bug Report | Low | Stored Color of text dimension changes | Assigned | |
1 |
Task Description
QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit Related Topic: https://www.qcad.org/rsforum/viewtopic.php?&t=7954
Reported is that black is saved as #00004c (dark blue) Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)
My system/installation saves black as #4c000 (dark red)
When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff. The threshold for that are #00, #65, #8b, #b2 & #e5 See: DimColorScale (png & dxf)
8 standard CAD colors fail saving correct Black (something with #4c) Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow (#80 turns #7f) & Gray (#adadad instead of #a0a0a4)
As with Gray, when mixing the 3 colors it gets rather fuzzy ... #505050 & #555555 both turn #5b5b5b & #464646 turns #4c4226
A snippet of my investigation is included in the topic (45 files in a ZIP)
CVH
|
|
2181 | QCAD (main) | Suggestion | Very Low | Apply more distinguishable Enabled and Disabled state i... | Assigned | |
1 |
Task Description
QCAD Professional Win7 WinInstaller 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related forum Topic: https://qcad.org/rsforum/viewtopic.php?t=8015
CVH
|
|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
3 |
Task Description
Select the previously selected entities.
|
|
2189 | QCAD (main) | Feature Request | Low | Vertically and/or diagonally stacked fractions option. | Assigned | |
2 |
Task Description
The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.
|
|
2191 | QCAD (main) | Feature Request | Low | Extend the functionality of the Reorder tool | Assigned | |
3 |
Task Description
Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.
See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170
|
|
2192 | QCAD (main) | Feature Request | Low | Add "Define angle using mouse cursor" to Move and Rotat... | Assigned | |
2 |
Task Description
The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool
|
|
2195 | QCAD (main) | Feature Request | Low | Saved views include memory of block | Assigned | |
1 |
Task Description
When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.
|
|
2205 | QCAD (main) | Bug Report | Low | Text rendering fails in certain zoom level | Waiting on fix in 3rd party library | |
1 |
Task Description
Case: Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level
Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.
|
|
2216 | QCAD (main) | Suggestion | Low | DIM modification cause overlapping text | Assigned | |
1 |
Task Description
When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.
|
|
2226 | QCAD (main) | Feature Request | Very Low | macOS: support proxy icon | Assigned | |
|
Task Description
Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.
|
|
2227 | QCAD (main) | Feature Request | Low | CAM > CAM Export: post processor for tangential knife c... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342
|
|
2229 | QCAD (main) | Feature Request | Low | Property Editor, option format property values as decim... | Assigned | |
|
Task Description
Angle Display is decimal although the decimal display is disabled in Application Preferences.
Format should be 17° 31’ 52” instead of 17.531111.
|
|
2242 | QCAD (main) | Suggestion | Low | Bill of Materials | Assigned | |
4 |
Task Description
It would be a very interesting feature to add to future versions.
I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.
The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.
The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.
It’s a very interesting thing! It would be great on QCad.
|
|
2248 | QCAD (main) | Bug Report | Very Low | Themes: east and west dock widget tabs facing the wrong... | Assigned | |
1 |
Task Description
Hi Andrew
In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions. I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report. I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..
Best Regards John Hyslop PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu
|
|
2252 | QCAD (main) | Bug Report | Low | Freeze / crash when selecting clamped splines (not crea... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8531
|
|
2261 | QCAD (main) | Suggestion | Very Low | QCAD change freehand tool to freehand spline tool | Assigned | |
|
Task Description
no task description |
|
2264 | QCAD (main) | Bug Report | Low | Hatching segment selection stops at entity - hatch patt... | Assigned | |
1 |
Task Description
QCAD Professional Windows7 pro WinInstaller Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153
Selecting hatch boundary segments of the horizontal polyline segment at (1169.933593;274.432562)-(1089.933593;274.432562)
Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment. Such intersections points where already no longer regarded as snappoints. See :
FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090. Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414
Regards, CVH
|
|
2266 | QCAD (main) | Bug Report | Low | Crash while creating an angular dimension | Assigned | |
|
Task Description
no task description |